There are several basic methods of receiving payment for products sold abroad. As with domestic sales, a major factor that determines the method of payment is the amount of trust in the buyer's ability and willingness to pay. For sales within our country, if the buyer has good credit, sales are usually made on open account; if not, cash in advance is required. For export sales, these same methods may be used; however, other methods are also often used in international trade. Ranked in order from most secure for the exporter to least secure, the basic methods of payment are:
•cash in advance,
•letter of credit,
•documentary collection or draft,
•open account, and
•other payment mechanisms, such as consignment sales
Since getting paid in full and on time is of utmost concern to exporters, risk is a major consideration. Many factors make exporting riskier than domestic sales. However, there are also several methods of reducing risks. One of the most important factors in reducing risks is to know what risks exist. For that reason, exporters are advised to consult an international banker to determine an acceptable method of payment for each specific transaction.
Cash in advance Cash in advance before shipment may seem to be the most desirable method of all, since the shipper is relieved of collection problems and has immediate use of the money if a wire transfer is used. Payment by check, even before shipment, may result in a collection delay of four to six weeks and therefore frustrate the original intention of payment before shipment. On the other hand, advance payment creates cash flow problems and increases risks for the buyer. Thus, cash in advance lacks competitiveness; the buyer may refuse to pay until the merchandise is received.
Documentary letter of credit and drafts The buyer may be concerned that the goods may not be sent if the payment is made in advance. To protect the interests of both buyer and seller, documentary letters of credit or drafts are often used. Under these two methods, documents are required to be presented before payment is made. Both letters of credit and drafts may be paid immediately, at sight, or at a later date. Drafts that are to be paid when presented for payment are called sight drafts. Drafts that are to be paid at a later date, which is often after the buyer receives the goods, are called time drafts or date drafts.
Since payment under these two methods is made on the basis of documents, all terms of sale should be clearly specified. For example, "net 30 days" should be specified as "net 30 days from acceptance" or "net 30 days from date of bill of lading" to avoid confusion and delay of payment. Likewise, the currency of payment should be specified as "US$XXX" if payment is to be made in U.S. dollars. International bankers can offer other suggestions to help.
Banks charge fees - usually a small percentage of the amount of payment - for handling letters of credit and less for handling drafts. If fees charged by both the foreign and local banks for their collection services are to be charged to the account of the buyer, this point should be explicitly stated in all quotations and on all drafts.
The exporter usually expects the buyer to pay the charges for the letter of credit, but some buyers may not accept terms that require this added cost. In such cases the exporter must either absorb the letter of credit costs or lose that potential sale.
Letters of credit
A letter of credit adds a bank's promise of paying the exporter to that of the foreign buyer when the exporter has complied with all the terms and conditions of the letter of credit. The foreign buyer applies for issuance of a letter of credit to the exporter and therefore is called the applicant; the exporter is called the beneficiary.
Payment under a documentary letter of credit is based on documents, not on the terms of sale or the condition of the goods sold. Before payment, the bank responsible for making payment verifies that all documents are exactly as required by the letter of credit. When they are not as required, a discrepancy exists, which must be cured before payment can be made. Thus, the full compliance of documents with those specified in the letter of credit is mandatory.
Often a letter of credit issued by a foreign bank is confirmed by a local bank. This means that the local bank, which is the confirming bank, adds its promise to pay to that of the foreign, or issuing, bank. Letters of credit that are not confirmed are advised through a local bank and are called advised letters of credit. Exporters may wish to confirm letters of credit issued by foreign banks not only because they are unfamiliar with the credit risk of the foreign bank but also because there may be concern about the political or economic risk associated with the country in which the bank is located. An international banker can help exporters evaluate these risks to determine what might be appropriate for each specific export transaction.
A letter of credit may be either irrevocable (that is, it cannot be changed unless both the buyer and the seller agree to make the change) or revocable (that is, either party may unilaterally make changes). A revocable letter of credit is inadvisable. A letter of credit may be at sight, which means immediate payment upon presentation of documents, or it may be a time or date letter of credit with payment to be made in the future. See the "Drafts" section of this chapter.
Any change made to a letter of credit after it has been issued is called an amendment. The fees charged by the banks involved in amending the letter of credit may be paid by either the exporter or the foreign buyer, but who is to pay which charges should be specified in the letter of credit. Since changes can be time-consuming and expensive, every effort should be made to get the letter of credit right the first time.
An exporter is usually not paid until the advising or confirming bank receives the funds from the issuing bank. To expedite the receipt of funds, wire transfers may be used. Bank practices vary, however, and the exporter may be able to receive funds by discounting the letter of credit at the bank, which involves paying a fee to the bank for this service. Exporters should consult with their international bankers about bank policy.
•cash in advance,
•letter of credit,
•documentary collection or draft,
•open account, and
•other payment mechanisms, such as consignment sales
Since getting paid in full and on time is of utmost concern to exporters, risk is a major consideration. Many factors make exporting riskier than domestic sales. However, there are also several methods of reducing risks. One of the most important factors in reducing risks is to know what risks exist. For that reason, exporters are advised to consult an international banker to determine an acceptable method of payment for each specific transaction.
Cash in advance Cash in advance before shipment may seem to be the most desirable method of all, since the shipper is relieved of collection problems and has immediate use of the money if a wire transfer is used. Payment by check, even before shipment, may result in a collection delay of four to six weeks and therefore frustrate the original intention of payment before shipment. On the other hand, advance payment creates cash flow problems and increases risks for the buyer. Thus, cash in advance lacks competitiveness; the buyer may refuse to pay until the merchandise is received.
Documentary letter of credit and drafts The buyer may be concerned that the goods may not be sent if the payment is made in advance. To protect the interests of both buyer and seller, documentary letters of credit or drafts are often used. Under these two methods, documents are required to be presented before payment is made. Both letters of credit and drafts may be paid immediately, at sight, or at a later date. Drafts that are to be paid when presented for payment are called sight drafts. Drafts that are to be paid at a later date, which is often after the buyer receives the goods, are called time drafts or date drafts.
Since payment under these two methods is made on the basis of documents, all terms of sale should be clearly specified. For example, "net 30 days" should be specified as "net 30 days from acceptance" or "net 30 days from date of bill of lading" to avoid confusion and delay of payment. Likewise, the currency of payment should be specified as "US$XXX" if payment is to be made in U.S. dollars. International bankers can offer other suggestions to help.
Banks charge fees - usually a small percentage of the amount of payment - for handling letters of credit and less for handling drafts. If fees charged by both the foreign and local banks for their collection services are to be charged to the account of the buyer, this point should be explicitly stated in all quotations and on all drafts.
The exporter usually expects the buyer to pay the charges for the letter of credit, but some buyers may not accept terms that require this added cost. In such cases the exporter must either absorb the letter of credit costs or lose that potential sale.
Letters of credit
A letter of credit adds a bank's promise of paying the exporter to that of the foreign buyer when the exporter has complied with all the terms and conditions of the letter of credit. The foreign buyer applies for issuance of a letter of credit to the exporter and therefore is called the applicant; the exporter is called the beneficiary.
Payment under a documentary letter of credit is based on documents, not on the terms of sale or the condition of the goods sold. Before payment, the bank responsible for making payment verifies that all documents are exactly as required by the letter of credit. When they are not as required, a discrepancy exists, which must be cured before payment can be made. Thus, the full compliance of documents with those specified in the letter of credit is mandatory.
Often a letter of credit issued by a foreign bank is confirmed by a local bank. This means that the local bank, which is the confirming bank, adds its promise to pay to that of the foreign, or issuing, bank. Letters of credit that are not confirmed are advised through a local bank and are called advised letters of credit. Exporters may wish to confirm letters of credit issued by foreign banks not only because they are unfamiliar with the credit risk of the foreign bank but also because there may be concern about the political or economic risk associated with the country in which the bank is located. An international banker can help exporters evaluate these risks to determine what might be appropriate for each specific export transaction.
A letter of credit may be either irrevocable (that is, it cannot be changed unless both the buyer and the seller agree to make the change) or revocable (that is, either party may unilaterally make changes). A revocable letter of credit is inadvisable. A letter of credit may be at sight, which means immediate payment upon presentation of documents, or it may be a time or date letter of credit with payment to be made in the future. See the "Drafts" section of this chapter.
Any change made to a letter of credit after it has been issued is called an amendment. The fees charged by the banks involved in amending the letter of credit may be paid by either the exporter or the foreign buyer, but who is to pay which charges should be specified in the letter of credit. Since changes can be time-consuming and expensive, every effort should be made to get the letter of credit right the first time.
An exporter is usually not paid until the advising or confirming bank receives the funds from the issuing bank. To expedite the receipt of funds, wire transfers may be used. Bank practices vary, however, and the exporter may be able to receive funds by discounting the letter of credit at the bank, which involves paying a fee to the bank for this service. Exporters should consult with their international bankers about bank policy.
Commentaires
Enregistrer un commentaire